Configuring Dashboard Filters

The Dashboard filter is used to additionally filter currently displayed data, letting you further focus the data view to suit current analysis purposes. The filter for each data view can be quickly selected, cleared, or reconfigured.

Each data view that can be displayed on the dashboard can be further customized by configuring the dashboard filter for the selected view. Click the Configure filter button on the Dashboard control toolbar to access the Configure Dashboard Filter dialog box. The dialog box that appears will correspond to the currently selected data view, and will list the corresponding filtering options.

Configure Dashboard Filter

When any data cell in a row meets the criteria defined in the filter, the entire data row will be displayed.

Configuring a Filter

Filters can be configured individually for each type of data view you can select on the Dashboard control. Configure filters using the following procedure.

To Configure Dashboard Filters

In the control toolbar, select the desired Data view from the drop-down menu.
Click Configure filter to access the Configure Dashboard Filter dialog box corresponding to the selected data view.
In the Configure Dashboard Filter dialog box, configure the desired data filtering options.

For the Analyst overview view, select the record states to display.
For the Collection details view, select the detail types to display.
For the Collection status view, select the status types to display.
For the Configuration poll view, select the configuration status types to display.
For the Data quality view, enter values for the maximum and minimum data quality values to display.
For the Edit state view, select the edit state types to display .
For the Exceptions views, enter a value for the minimum number of linked exceptions to display and/or the minimum number of open exceptions to display.
For the Raw data export view, select the raw data export statuses to display.

Click OK to save the filter configuration.
Click the Use filter check box to apply/clear the filter for the selected data view.

Filtering Options

For each data view selection, available filter options are as follows. See Configuring Dashboard Display Properties for more information about customizing the display of various properties on the screen.

Option	Description
Analyst overview
States to show	Note: Available configuration options are dependent on your system's operational mode (FULL or REPOSITORY) and the selected data mode (Device or Station), as described below. Click the check box(es) to select/clear the type(s) of records to display. Note: All listed options may not appear (e.g. exceptions, low data quality, PPAs) if configured otherwise in the administrative options. See Configuring System Options for more information. For FULL mode systems, filtering options are as follows. Missing Unavailable GA exceptions GA pending Exceptions Low quality PPAs Closed Edited Collected For REPOSITORY mode systems, filtering options are as follows. Missing Unavailable GA exceptions GA pending Exported Collected Note: There is a slight variation in the record status precedence depending on the selected data mode you are viewing (device or station), and depending on whether you are looking at a device or group Node. See Record Status Precedence for more information about order of appearance.
Collection details
Details to show	Click the check box(es) to select/clear the collection details to display. Options are as follows. Data missing Data unavailable All data collected Default value is all options selected. See Data Collection Details in the CygNet Measurement Concepts section for more information about these values.
Collection status
Status to show	Click the check box(es) to select/clear the collection status(es) to display. Options are as follows. Good Good (U) Failure Not requested Other Default value is all options selected. See Data Collection Status in the CygNet Measurement Concepts section for more information about these values.
Configuration poll
Show records if configuration has been polled within the span	Click the check box to select/clear the option to display records for which configuration has been polled. Default value is selected.
Show records if configuration has not been polled within the span	Click the check box to select/clear the option to display records for which configuration has not been polled. Default value is selected.
Data quality
Maximum quality to show	Type the percentage value for the maximum data quality percentage for which you want to display records. Default value is 100%.
Minimum quality to show	Type the percentage value for the minimum data quality percentage for which you want to display records. Default value is 0%.
Edit state
States to show	Click the check box(es) to select/clear the edit state(s) to display. Options are as follows. Open Closed PPA Mixed Default value is all options selected.
Exceptions (Linked or Open)
Minimum linked exceptions	Type in the value for the minimum number of linked exceptions you want to display. Default value is 0.
Minimum open exceptions	Type in the value for the minimum number of open exceptions you want to display. Default value is 0.
Raw data export (REPOSITORY mode systems only)
Show if all exported	Click the check box to select/clear the option to display records for which all raw data has been exported. Default value is selected.
Show if some exported	Click the check box to select/clear the option to display records for which some raw data has been exported. Default value is selected.
Show if none exported	Click the check box to select/clear the option to display records for which no raw data has been exported. Default value is selected.